NetWare v2.2
                             SIMULATION SOFTWARE

          This diskette contains a read.me file with details about the
          three possible ways to install the simulation software. You
          can read this file online by using option 1, or if you have a
          printer connected to LPT1, online, and Ready, you can print
          the read.me file by using option 2; it will print on four
          pages. The simulation software is in a compressed format on
          this diskette and must be copied into the appropriate direc-
          tories and decompressed BEFORE it can be used. The instructions
          for doing this are contained in the read.me file. This software
          uses 3.5 MB of disk space. An automatic installation routine is
          included under options 3 & 4. It will create a subdirectory
          called SIMULATE, and build the program there.

           1. To read the instructions, Enter the command: READ
           2. To print the instructions, Enter the command: PRINTSIM
           3. To install on a local drive, Enter the command:
                 LGO <source drive> <destination drive>
           4. To install on a network drive, temporarily Map S: to the
              desired PARENT directory and Enter the command:
                 NGO <source drive>