EIDE MAX README.TXT File 01/19/95 +=====================+ | Release Information | +=====================+ Device Driver Diskette...............................(Version 1.0) On this diskette you will find device drivers for the EIDE MAX LBA Control Driver. MAXI13.386 and MAXCTRL.386 (Version 1.0) is the driver for Microsoft Windows 3.1 and Windows for Workgroups 3.11 +=======================================================+ | EIDE MAX device driver for Microsoft Windows 3.1 | | and Windows for Workgroups 3.11 | +=======================================================+ The files MAXI13.386 and MAXCTRL.386 are the Microsoft Windows 3.1 disk driver for the EIDE MAX LBA controller. 1. Copy the driver files MAXI13.386 and MAXCTRL.386 to your system in the appropriate path. It is recommended that the driver files MAXI13.386 and MAXCTRL.386 be copied to the Windows SYSTEM directory. 2. Check if the following lines exit in the [386Enh] section of your SYSTEM.ini file. [386Enh] 32BitDiskAccess=ON If the statements do not exist, add them into the [386Enh] section. If the statements exist, but 32BitDiskAccess is set to "OFF", change it to "ON". 3. Delete the "device=*int13" and "device=*wdctrl" device setting. Delete the command line "device=*int13" and "device=*wdctrl" from the [386Enh] section of your SYSTEM.INI file, if it exists. 4. Install the virtual device "MAXI13.386" and "MAXCTRL.386". Add the following command lines in the [386Enh] section of the SYSTEM.INI file: device=[drive:][\path\]MAXI13.386 device=[drive:][\path\]MAXCTRL.386 The [drive:] and [\path\] point to the directory that contains MAXI13.386 and MAXCTRL.386 files. Note that the setting must specify the full path of the device drivers MAXI13.386 and MAXCTRL.386. +=============================+ | Trademark Acknowledgments | +=============================+ Windows is registered trademarks of Microsoft Corporation.