Driver for Windows NT README File Version 1.10 +===================================================================+ | Microsoft Windows NT version 3.1 disk driver for Disk Accelerator| +===================================================================+ You only need this driver under the following situations: - You want to install TURBO mode under Windows NT. - Your Disk Accelerator is installed as the PRIMARY disk controller with more than two IDE drives attached. - Your Disk Accelerator works as the SECONDARY disk controller. ****** Install the Driver ****** Please follow the steps below to install the driver. 1. Boot with Windows NT 3.1. 2. Type the following command in the "Command Prompt" window: A:\NT\NTINS The driver will be installed automatically. ****** Removing the Driver ****** After installing the driver, if you want to remove the driver, please type the following command in the "Command Prompt" window: NTUNINS The driver will be removed automatically.