Fujitsu M2616ET:Switch Setting

PCA Layout   All configurations marked "*" are default settings

Setting Switches SW1

IRQ14/RSVD switch
       Key1    Key2    Function
       ON(*)   OFF     Normal status(pin29=RESERVED, pin31=IRQ14)
       OFF     ON(*)   After exchange(pin29=IRQ14,pin31=RESERVED)
Slave present mode/Active mode
       Key3    Key4    Function
       ON      OFF     Slave present mode
       OFF     ON      Active mode

Setting Switches SW2

Mater/Slave
       Key 1    Key2
       ON       OFF      Master drive
       OFF      ON       Slave side of 2-drive system
1-drive/2-drive
       Key 3    ON        2-drive
                OFF(*)    1-drive
Write protect
       Key 4    ON        write protected
                OFF(*)    write enabled
I/O Channel ready(IOCHRDY)output
       Key 5    ON        IOCHRDY
                OFF(*)    RESERVED
ECC bytes
       Key 6    ON        4 bytes
                OFF(*)    7 bytes

to the table of contents!!