| ID0 | ID1 | ID2 | SCSI ID |
| OUT | OUT | OUT | 0 |
| IN | OUT | OUT | 1 |
| OUT | IN | OUT | 2 |
| IN | IN | OUT | 3 |
| OUT | OUT | IN | 4 |
| IN | OUT | IN | 5 |
| OUT | IN | IN | 6 |
| IN | IN | IN | 7 |
*Use either but not both : E1 to E3 or 0E1 to 0E3. The 0E header is not installed on drive configurations with a LED on the PCBA. Delay Spin: A jumper in the E4 location, disables spin up on power-on. Disabling spin up on application of power can also be enabled by settting the DSPN bit in MODE SELECT page 0.
| E4 | Reserved |
| E5/OE5 | Disable Spin on Power-on |
| E6 | Spin delay by SCSI ID |
| E7 | Disable SCSI Bus Parity |
| J4 | |
| 1 | +12 V |
| 2 | Ground |
| 3 | Ground |
| 4 | +5V |
| Mounting Holes |
| Side: 6-32 UNC-2B .15 Max. Insertion |
| Bottom: 6-32 UNC-2B .25 Max. Insertion |