OS/2 2.0 GA (CSD Level 02000 ONLY) Fix
New BVHSVGA.DLL File
(as supplied by Bernie Thompson, IBM Boca, May 1, 1992)

FIX HISTORY:
   Problems with Western Digital PVGA1D based adapters:  Will trap after
install, the first time you boot.  (BVSVHGA.DLL traps, and after install
is the first time this is loaded).
4-21-92 /OS2/DLL/BVHSVGA.DLL  size: 22448 bytes

To fix for the install trap:
After installation (disk 15), when OS/2 is going to fully boot for the
first time, boot up with the Install disk and Disk 1 instead of off the
hard drive.  Then, hit (ESC) when the disk one prompts you to hit
(ENTER) to continue.  You will be dumped to a command line.  Now copy
over /OS2/DLL/BVHSVGA.DLL with this updated file.
Reboot and you should be fine.

[I have not tested this fix but believe it to work.  Please forward any
problems with this fix to me at Internet address sip1@ellis.uchicago.edu
and I will forward them to IBM Boca.  Report other problems, as always,
directly to IBM.  CSDs -- Corrective Service Diskettes -- will incorpor-
ate this fix, but this file can serve as a temporary workaround.

Timothy F. Sipples
May 1, 1992.]