GraphicsENGINE Generic CADD Driver Features: * Very Fast- Written in 100% assembly language. * Very Small- Small driver uses only 3.7K. Large driver uses only 14.6K. Hardware Requirements: * 286 or better CPU. * GraphicsENGINE board. Resolution: * 1280 x 1024, 1024 x 768, 800 x 600, 640 x 480 16 colors. * 256 colors with 1 megabyte of screen memory. I N S T A L L A T I O N ----------------------- Automatic installation: 1. Go to disk drive that has a Generic product installed. 2. Place the driver install diskette in drive A:. 3. Type A:INSTALL . Then select INSTALL's GENERIC CADD Drivers menu, press ENTER key and complete the installation. INSTALL will copy the appropriate files to your default directory. 4. Run CONFIG program when prompted, selecting this driver. D R I V E R U S E ------------------- For drivers that do not allow the selection of the resolutions during installation, the driver will default to the highest resolution possible. If this is not what you desired, the resolution could be overridden by setting an environment variable as following... set S3 86C_911= Where is: 0 640 x 480, 256 colors 1 800 x 600, 16 colors 2 800 x 600, 256 colors 3 1024 x 768, 16 colors 4 1024 x 768, 256 colors 5 1280 x 960, 16 colors 6 --> Reserved <-- 7 1280 x 1024, 16 colors 8 --> Reserved <-- Please note that not all resolution modes are available. The set S3 86C_911= instruction can be included in the AUTOEXEC.BAT file. The driver is loaded and unloaded in memory by CADD, and has no TSR (Terminate-and-Stay-Resident) considerations. If you have no need for the screen save function in CADD, it is recommended that you use the smaller driver. This will give you an additional 11K of drawing space if you have no EMS, or around 88K if you did have EMS.